english gallery

Cable Tray CTC

The C-shape cable tray is similar to the C-shaped cable trough but has a hole in the bottom (and side walls) for ventilated, it is also known as perforated cable tray, has the simple structure and is easy to customize according to requirements. Cable tray C-shape body structure is formed by press brake (one piece) and always comes with a lid included. It is designed for light loads and is used for low voltage cables, signal control cables … The general disadvantage of a one piece structure (box type) is that its disadvantage is the weakest structure, providing the lowest load capacity so only produced in 3m/pc

General Specifications:

  • Section type: C-Shape, flange in
  • Construction: CNC Punching, Press brake formed
  • Height (mm): 50, 75, 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 50, 75, 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 75, 150, 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Aliminium alloy sheet A5052 H32
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Trunking CKC

C-shape cable trunking (troughs, solid bottom tray) are classic type cable tray, with the simplest structure and easy to customize according to requirements. C-shape cable trunking has a closed structure, the body is formed by press brake (one piece) and always has a lid attached. It is designed for light loads and is used for low voltage cables, signal control cables … Its disadvantage is the weakest structure, providing the lowest load capacity so only produced in 3m/pc.

 

General Specifications:

  • Section type: C-Shape, flange in
  • Construction: Press brake formed
  • Height (mm): 50, 75, 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 50, 75, 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 75, 150, 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Aliminium alloy sheet A5052 H32
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Ladder CLE

The E-shape cable ladder is the same as the classic C-type cable ladder, but is enhanced by two more stiff ribs in the middle flanges. The rungs are welded to the stiffening rib and below flange helps the ladder structure to be more stable, more stronger, will give a higher load capacity 15 ~ 30% higher than the C-type. It is designed for medium loads, longer fabrication times and 5 ~ 10% higher price than C-type. The CLE cable ladder is often used in industrial projects.

 

General Specifications:

  • Side rail type: E-Shape, flange in 20mm
  • Rung type: C-strut 20×40
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 300, 450, 600
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10C
  • CSA load class: D3M, E3M
  • Compliances: NEMA VE-1

Cable Ladder CLC

The C-shape cable ladder is a classic ladder type, with the simplest structure, the least processing stages and easy to customize according to requirements. It is designed for light loads, offers fast delivery times and is cheap (but it is not really cheap when comparing load carrying performance compared to the E-shape and I-beam type have the same weight). Its disadvantage is that the weakest structure, the lowest carrying capacity, is only length 3 m/pc and the support distance must be less than 2m (weak should add more supports -> will increase materials and labor costs).

 

General Specifications:

  • Side rail type: C-Shape, flange in 20mm
  • Rung type: C-strut 15×30
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 50, 75, 100
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5, 3.0
  • Fittings radius (mm): 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Stainless steel sheet SUS304
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Tray CTC

The C-shape cable tray is similar to the C-shaped cable trough but has a hole in the bottom (and side walls) for ventilated, it is also known as perforated cable tray, has the simple structure and is easy to customize according to requirements. Cable tray C-shape body structure is formed by press brake (one piece) and always comes with a lid included. It is designed for light loads and is used for low voltage cables, signal control cables … The general disadvantage of a one piece structure (box type) is that its disadvantage is the weakest structure, providing the lowest load capacity so only produced in 3m/pc

General Specifications:

  • Section type: C-Shape, flange in
  • Construction: CNC Punching, Press brake formed
  • Height (mm): 50, 75, 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 50, 75, 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 75, 150, 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Aliminium alloy sheet A5052 H32
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Trunking CKC

C-shape cable trunking (troughs, solid bottom tray) are classic type cable tray, with the simplest structure and easy to customize according to requirements. C-shape cable trunking has a closed structure, the body is formed by press brake (one piece) and always has a lid attached. It is designed for light loads and is used for low voltage cables, signal control cables … Its disadvantage is the weakest structure, providing the lowest load capacity so only produced in 3m/pc.

 

General Specifications:

  • Section type: C-Shape, flange in
  • Construction: Press brake formed
  • Height (mm): 50, 75, 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 50, 75, 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 75, 150, 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Aliminium alloy sheet A5052 H32
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Ladder CLE

The E-shape cable ladder is the same as the classic C-type cable ladder, but is enhanced by two more stiff ribs in the middle flanges. The rungs are welded to the stiffening rib and below flange helps the ladder structure to be more stable, more stronger, will give a higher load capacity 15 ~ 30% higher than the C-type. It is designed for medium loads, longer fabrication times and 5 ~ 10% higher price than C-type. The CLE cable ladder is often used in industrial projects.

 

General Specifications:

  • Side rail type: E-Shape, flange in 20mm
  • Rung type: C-strut 20×40
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 300, 450, 600
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10C
  • CSA load class: D3M, E3M
  • Compliances: NEMA VE-1

Cable Ladder CLC

The C-shape cable ladder is a classic ladder type, with the simplest structure, the least processing stages and easy to customize according to requirements. It is designed for light loads, offers fast delivery times and is cheap (but it is not really cheap when comparing load carrying performance compared to the E-shape and I-beam type have the same weight). Its disadvantage is that the weakest structure, the lowest carrying capacity, is only length 3 m/pc and the support distance must be less than 2m (weak should add more supports -> will increase materials and labor costs).

 

General Specifications:

  • Side rail type: C-Shape, flange in 20mm
  • Rung type: C-strut 15×30
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 50, 75, 100
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5, 3.0
  • Fittings radius (mm): 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Stainless steel sheet SUS304
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Trunking CKC

C-shape cable trunking (troughs, solid bottom tray) are classic type cable tray, with the simplest structure and easy to customize according to requirements. C-shape cable trunking has a closed structure, the body is formed by press brake (one piece) and always has a lid attached. It is designed for light loads and is used for low voltage cables, signal control cables … Its disadvantage is the weakest structure, providing the lowest load capacity so only produced in 3m/pc.

 

General Specifications:

  • Section type: C-Shape, flange in
  • Construction: Press brake formed
  • Height (mm): 50, 75, 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 50, 75, 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.0, 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 75, 150, 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Aliminium alloy sheet A5052 H32
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Ladder CLE

The E-shape cable ladder is the same as the classic C-type cable ladder, but is enhanced by two more stiff ribs in the middle flanges. The rungs are welded to the stiffening rib and below flange helps the ladder structure to be more stable, more stronger, will give a higher load capacity 15 ~ 30% higher than the C-type. It is designed for medium loads, longer fabrication times and 5 ~ 10% higher price than C-type. The CLE cable ladder is often used in industrial projects.

 

General Specifications:

  • Side rail type: E-Shape, flange in 20mm
  • Rung type: C-strut 20×40
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 300, 450, 600
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10C
  • CSA load class: D3M, E3M
  • Compliances: NEMA VE-1

Cable Ladder CLC

The C-shape cable ladder is a classic ladder type, with the simplest structure, the least processing stages and easy to customize according to requirements. It is designed for light loads, offers fast delivery times and is cheap (but it is not really cheap when comparing load carrying performance compared to the E-shape and I-beam type have the same weight). Its disadvantage is that the weakest structure, the lowest carrying capacity, is only length 3 m/pc and the support distance must be less than 2m (weak should add more supports -> will increase materials and labor costs).

 

General Specifications:

  • Side rail type: C-Shape, flange in 20mm
  • Rung type: C-strut 15×30
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 50, 75, 100
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5, 3.0
  • Fittings radius (mm): 300
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Stainless steel sheet SUS304
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10A, 10B, 10C
  • CSA load class: C3M, D3M
  • Compliances: NEMA VE-1

Cable Ladder CLE

The E-shape cable ladder is the same as the classic C-type cable ladder, but is enhanced by two more stiff ribs in the middle flanges. The rungs are welded to the stiffening rib and below flange helps the ladder structure to be more stable, more stronger, will give a higher load capacity 15 ~ 30% higher than the C-type. It is designed for medium loads, longer fabrication times and 5 ~ 10% higher price than C-type. The CLE cable ladder is often used in industrial projects.

 

General Specifications:

  • Side rail type: E-Shape, flange in 20mm
  • Rung type: C-strut 20×40
  • Rung spacing (mm): 300 (Standard)
  • Construction: Welding for side rails and rungs
  • Height (mm): 100, 125, 150
  • Straight Length: 3m only
  • Width (mm): 100, 150, 200, 300, 400, 500, 600
  • Thickness (mm): 1.2, 1.5, 2.0, 2.5
  • Fittings radius (mm): 300, 450, 600
  • Materials:
  • Hot roll mild steel sheet JIS G3131-SPHC
  • Pre-galvanized steel sheet (Z12) JIS G3302-SGCC
  • Pre-galvanized super corrosion resistant (ZAM-K27) JIS G3323-SGMCC
  • Stainless steel sheet SUS304, SUS316
  • Finishes: Natural (bare), Powder coating, Hot dip galvanized after fabrication
  • NEMA load class: 10C
  • CSA load class: D3M, E3M
  • Compliances: NEMA VE-1