-
USK (Universal Splice Kit)
CODE S4 DC EG USKS4 USKDC USKEG • General connection for light duty load
• USK = C30 + C15 + BLCV620B
*See more detail pages: CM-73~76, for
assembly horizontal elbow 90 degree, large radius -
SPK (Splice Plate Kit)
CODE S4 DC EG SPKS4 SPKDC SPKEG • Straight side connection, for medium duty load
• SPK = C80 + C15 + BLCV620B -
FSB (Fast Splice Bar)
CODE S4 DC EG FSBS4 FSBDC FSBEG • Straight connection, quick installation with
QTO tool (see page CM-55), medium duty load.
• 50pcs. x FSB => included 1pc. x QTO
-
SBK7 (Splice Bar Kit 7 Holes)
CODE S4 DC EG SBK7S4 SBK7DC SBK7EG • Straight connection, for heavy duty load.
• SBK7 = SB7H + 3x(C15 + BLCV620B)
-
SBK11(Splice Bar Kit 11 Holes)
CODE S4 DC EG SBK11S4 SBK11DC SBK11EG • Extention joint (space not enough to insert tray)
• Reducer bar or splice for horizontal elbow 45 degree.
• SBK11 = SB11H + 4x(C15 + BLCV620B) * See more detail pages: CM-70~72, for assembly horizontal elbow 45 degree. -
BSP(Bottom Splice Plate)
CODE S4 DC EG BSPS4 BSPDC BSPEG • Straight bottom connection
• Quick installation without hardware -
BSK4 (Bottom Splice Kit 45 degree)
CODE S4 DC EG BSK4S4 BSK4DC BSK4EG • Bottom connection for horizontal elbow 45 degree
• BSK4 = BS45 + 2x(C50S + BLCV620B)* See more detail pages: CM-70~72 -
BSK9 (Bottom Splice Kit 90 Degree)
CODE S4 DC EG BSK9S4 BSK9DC BSK9EG • Bottom connection for intersection 90 degree
• BSK9 = BS90 + 2x(C50S + BLDD620) -
CSK4 (Corner Splice Kit 4 Holes)
CODE S4 DC EG CSK4S4 CSK4DC CSK4EG • CSK4 = CS4H + 4x(C15 + BLCV620B) -
CSK7 (Corner Splice Kit 7 Holes)
CODE S4 DC EG CSK7S4 CSK7DC CSK7EG • Side connection for intersection 90 degree
• CSK7 = CS7H + 4x(C15 + BLCV620B) -
CRSK (Corner Radius Splice Kit)
For Tray Height Code S4 DC EG 54H CRSK1S4 CRSK1DC CRSK1EG 105H CRSK2S4 CRSK2DC CRSK2EG • Side connection for intersection 90 degree, corner radius R=75mm
• CRSK1 = CRS50 + 4x(C15 + BLCV620B)
• CRSK2 = CRS100 + 4x(C15 + BLCV620B) -
VASK (Vertical Adjustable Splice Kit)
CODE S4 DC EG VASKS4 VASKDC VASKEG • Vertical riser up/down, vertical tee connection.
• VASK = VAS + 4x(C15 + BLCV620B) -
CK1 (Single Wire Clamp Kit)
CODE S4 DC EG CK1S4 CK1DC CK1EG • Universal clamp for trays or accessories
• CK1 = C15 + BLCV620B -
CK2 (Dual Wire Clamp Kit)
CODE S4 DC EG CK2S4 CK2DC CK2EG • Hold down clamp for tray CM30/30
• CK2 = C20 + BLCV620B -
CK3 (Dual Wire Clamp Kit)
CODE S4 DC EG CK3S4 CK3DC CK3EG • Hold down clamp for trays width 50mm
• CK3 = C25 + BLCV620B -
CK4 (Dual Wire Clamp Kit)
CODE S4 DC EG CK4S4 CK4DC CK4EG • Hold down clamp for trays width >= 100mm
• CK4 = C50S + BLCV620B -
CK5 (Dual Wire Clamp Kit)
CODE S4 DC EG CK5S4 CK5DC CK5EG • Hold down clamp for use with U-strut.
• CK5 = C50L + BLDD620 + TANU6 -
BKZ (Bracket Kit, Z Type)
For Width Code S4 DC EG 30W BKZ1S4 BKZ1DC BKZ1EG 50W BKZ2S4 BKZ2DC BKZ2EG • BKZ1 = Z20 + C20 + BLDD620
• BKZ2 = Z25 + C25 + BLDD620 -
BKL (Bracket Kit, L Type)
For Tray width Code S4 DC EG 30W BKL1S4 BKL1DC BKL1EG 50W BKL2S4 BKL2DC BKL2EG 100W BKL3S4 BKL3DC BKL3EG • BKL1 = L30 + C20 + BLCV620B
• BKL2 = L50 + C25 + BLCV620B
• BKL3 = L100 + C50S + BLCV620B -
HKL (Hanger Kit, L Type)
For Tray width Code S4 DC EG CM 30/50 CM 54/50
HKL1S4 HKL1DC HKL1EG CM 30/100 CM 54/100
HKL2S4 HKL2DC HKL2EG • HKL1 = HL50 + C25 + BLCV620B
• HKL2 = HL100 + C50S + BLCV620B -
HKU (Hanger Kit, U Type)
For Tray Width Code S4 DC EG 100W HKU1S4 HKU1DC HKU1EG 150W HKU2S4 HKU2DC HKU2EG 200W HKU2S4 HKU3DC HKU3EG • HKU1 = HU100 + 2x(C25 + BLCV620B)
• HKU2 = HU150 + 2x(C25 + BLCV620B)
• HKU3 = HU200 + 2x(C25 + BLCV620B) -
-
-
-
-
CCK (Conduit Clamp Kit)
Type Code S4 DC EG 2xØ22 CCK1S4 CCK1DC CCK1EG Ø22 & Ø27 CCK2S4 CCK2DC CCK2EG 2xØ27 CCK3S4 CCK3DC CCK3EG • CCK1 = CC1 + 2x(C15 + BLCV620B)
• CCK2 = CC2 + 2x(C15 + BLCV620B)
• CCK3 = CC3 + 2x(C15 + BLCV620B)
